Blue Book is online at msauk.org
http://www.msauk.org/uploadedfiles/msa_forms/bluebooks/10/349-371%20Karting.pdf
17.8. The rear bumper must: 17.8.1. Be constructed from magnetic steel tubing with minimum outside diameter of 18mm and a minimum wall thickness of 1.4mm. 17.8.2. Consist of a minimum of a single horizontal tube, with outer extensions forming a closed loop, with two link tubes to the chassis anchorage points (as per Drawing 5, Diagram 1) at least 450mm apart at any point. The radius of the outer extension is free but it should not be less than 21⁄2 times the tube outside diameter. 17.8.3. Have its tube and uppermost extension element between 160mm and 200mm above the ground in dry configuration. 17.8.4. Have its upper tube and extension loops madefrom a single piece of tubing. 17.8.5. In side view, have a rearward rake of between 20 and 45 degrees to the vertical (see Drawing 5, Diagram 3). 17.8.6. Have an overall width not exceeding the rear width of the kart at any time (measured to the outside of the rear wheels or tyres, whichever is the greater). 17.8.7. Cover at least 50% of each rear wheel/tyre at all times. 17.8.8. Have any attachment fasteners made of high tensile steel.
|
|